High Performance 1/1.2" CCD Microscopy Camera
Number of pixels: 1920 (H) x 1216 (V) = 2.3 megapixels
Pixel size: 5.86 µm x 5.86 µm
Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2" (diagonal 13.3 mm)
Spectral sensitivity: With protective glass approx. 350 nm to 1000 nm Quantum efficiency approx. 72% at 520 nm (including sensor cover glass)
Max. charge per pixel: Approx. 32,000 e Full Well Capacity
Selectable resolution: H x V / binning factor (digital)
1920 x 1216 / 1x1 basic pixel count
960 x 608 / 2x2
640 x 404 / 3x3
480 x 304 / 4x4
384 x 240 / 5x5
Live frame rates
(depending on hardware and software configuration) Exposure time 1ms:
H x V / Frame rate
1936 x 1460 / >100 fps
Frame rates for time series recordings
(depending on image ROI, PC hardware and software configuration):
H x V / Frame rate
1920 x 1216 / 128
1920 x 1080 / 145
960 x 612 / 245
480 x 306 / 458
384 x 244 / 557
1280 x 112 / 982
1024 x 112 / 1003
Time series recording with maximum rate via "burst mode" function Reading of sensor sub-areas ("ROI"): Freely definable
Digitisation: 14 bits (internal 12-bit ADC, 14 bits through data processing)
Dynamic range: Typically >5000 : 1 (74> dB) with typical readout noise of less than 6e
Dark current: approx. 1.1 e/p/s
Integration time: 0.1 ms to 60 s
Cooling: single-stage, controlled Peltier cooling to 15°C sensor temperature
Additional features:
- Additional digital dark current correction
- Eight preloadable image parameter sets for quick parameter changes
- Transmission of recording time stamp with image data
- Status LED camera: colour-coded display for operating status, dimmable
- Status LED trigger: colour-coded display for trigger signal status, dimmable
Control signal connections: Galvanically isolated I/O signals for exposure time, readout time, ready (e.g. for controlling external electric shutters), 1 trigger input for start recording, 5V auxiliary voltage, GND
Interface: USB 3.0, 300 MBytes/s, 3m dual USB cable with USB 3.0 and USB 2.0 Optional operation on USB 2.0 with reduced frame rate possible, Optional operation without cooling possible with short exposure times and reduced power consumption,
Optical interface: C-mount, Teflon-coated thread,
Penetration depth for lenses: Max. 5 mm
Max. file size per image: approx. 4.7 MB at 1920 x 1216 pixels with 14 bits/pixel
Size/weight: approx. 10.8 cm x 7.8 cm x 4.3 cm / 500 g Housing: Blue anodised aluminium with cooling fins, 1/4" photo thread connection
Approvals: CE
Power supply via PC: USB 3.0 cable for camera electronics, USB 2.0 cable for Peltier cooling,
Power consumption: 7 W (5V, 1.4A)
Ambient conditions: +5° ... +35° Celsius, max. 80% relative humidity, non-condensing, free air circulation required
Supported operating systems: Windows 7 x64 Prof./Ultimate SP1 (ZEN 2 lite/pro/system)
Scope of delivery:
- Driver software 64-bit
- USB 3.0 PCIe x1 interface
- Dual USB 3.0/USB 2.0 cable 3 m
- Protective glass BK7 (coated)
- Object micrometer 0.01 mm for manual calibration
- ZEISS ZEN 2 Starter software
